Eldes EPIR3 - Page 96

96
96 EN
EPIR3 User Manual v1.3
7.7.4. EWF1/EWF1CO Interconnection
The interconnection feature automatically links all wireless smoke/CO detectors that are paired with the
alarm system. When any EWF1/ EWF1CO detects smoke or carbon monoxide (CO), it will sound the built-
in siren and send the signal to the alarm system resulting in an instant alarm followed by built-in siren
sound caused by the rest of EWF1/EWF1CO wireless smoke/CO detectors. EWF1/EWF1CO device that
detected smoke/CO will auto-reset when the smoke/CO clears, while the rest of EWF1/EWF1CO smoke/
CO detectors will continue to sound in accordance with the set time period (by default - 30 seconds).
By default, the interconnection feature is enabled and the siren alarm duration is 30 seconds.
NOTE: The maximum supported EWF1/EWF1CO siren alarm duration is 255 seconds (4 mins. 15 secs.)
even if the system‘s alarm duration value is longer.
NOTE: System‘s alarm duration has a higher priority against the EWF1/EWF1CO siren alarm duration,
therefore EWF1/EWF1CO will sound as long as the system‘s alarm duration set up, unless the set up
value for EWF1/EWF1CO siren alarm duration is shorter.
7.7.5. Disabling and enabling siren if wireless signal is lost
If a wireless device loses its wireless signal for 60 minutes or longer, the system will send notication by
SMS text message to user phone number and activate the siren. By default, the siren will be activated
when wireless signal is lost.