Eldes EPIR3 - Page 77

77
77EN
EPIR3 User Manual v1.3
Function EKB3W command Value Range Comment Example
Activate/deacti-
vate Congura-
tion mode
INSTaaaa# 4-digit administrator password INST1470#
Set backup
connections
83bb0# GPRS network 83020#
83bb1# Voice calls
83bb2# SMS
83bb3# not in use
bb 01 - 02 backup connecton slot
Set delay after
last communi-
cation attempt
69xxxxx# xxxxx 0 - 65535 period in seconds 69100#
Set server IP
address
40xxxxxxxxxxxx# xxxxxxxxxxxx server IP address excluding dots 40085222120085#
Set server port
number
44xxxxx# xxxxx 0 - 65535 sever port number 44250#
Set DNS1
41xxxxxxxxxxxx# xxxxxxxxxxxx DNS1 IP address 40085222120081#
Set DNS2
42xxxxxxxxxxxx# xxxxxxxxxxxx DNS2 IP address 40085222120082#
Select protocol
430# TCP 431#
431# UDP
Set number of
GPRS attempts
68xxx# xxx 01 - 255 number of data transmission attempts via GPRS network in case the intitial
attempt was unsuccessful
6825#
Set test period
46xxxxx# xxxxx 0 - 65535 ping period via GPRS network in seconds 46260#
Set Unit ID
47xxxx# xxxx 0000 - 9999 4-digit number required to identify the alarm system unit by EGR100 middle-
ware (communication via GPRS network)
475563#
Set monitoring
station phone
number
26 xx
yyyyyyyyyyyyyyy#
xx
yyyyyyyyyyyyyyy
01 - 03 monitoring station phone number slot for communicaiton via Voice Calls 26020044170911XXXX1#
monitoring station phone number, 15 digits max.; supported format:
• International (with 00) – Example for UK: 0044170911XXXX1.
• Local – Example for UK: 0170911XXXX1.