ADL 2010 / 01 11/57 599 72 63-27
4.7 Enabling and disabling the buzzer
At the end of the drying cycle or if an alarm is
triggered the buzzer will sound intermittently.
When the ALARM button is pressed, the
corresponding indicator light goes out and the
buzzer is deactivated in the following cases:
• when the programme is selected;
• when the buttons are pressed;
• when the programme selector is turned to
another position during the programme, or
when an option button is pressed during the
cycle;
• at the end of the programme.
In all other cases the buzzer remains active.
4.8 Time programme (on certain models only)
Use the TIME programme to select drying for a
customised length of time.
After selecting the programme, you can select its
duration: options range from 10 minutes to 3 hours,
with 10 minute increments.
• Turn the programme selector to the
programme TIME.
• Press the TIME button repeatedly until the
length of time you require is shown on the
display.
If the length of time is not selected, the programme
will set automatically to 10 minutes.
To Next Page
Loading...
