Commissioning the system
7. (See K, L) Once the Wi-Fi connection is successful with the hub, a hotspot
network will be created with the Wi-Fi name ElkoGW_XXXXXX (I). Tap Go to
Connect (See L).
Then you will be prompted to the phone setting page that will request your
approval to connect to the Wi-Fi network. Tap ElkoGW_XXXXXX to connect
to Wi-Fi.
NOTE:
• The last 6 digits in the Wi-Fi network (ELKOGW_XXXXXX)
represents the Ethernet MAC number which is labeled on the back of
the device.
• The default password for the Wi-Fi network - ElkoGW_XXXXXX is
elkosmarthome.
Go to Connect
Cancel
How to connect your Mobile Phone
to the ELKO HUB
Click the “Go to Connect” button and fi nd the Elko
Hub Wifi "ElkoGWXXXXXX" for connection.
Notes:
1. How to fi nd the specifi c device MAC address
when you have multiple hubs
2. password is required? You can fi nd the
password in Elko system user guide here https://
elkosmart.elko.no/?hslang=no.
AP Mode
MY NETWORKS
OTHER NETWORKS
WLAN
below WLAN network connections have been turned
off from control server
IOT_Test
i
ChinaNet
i
Fritzboxtest
i
below WLAN network connections have been turned
8. After successfully connecting the phone to Wi-Fi, go back to the App. When
the connection is progressed, the AP mode commissioning is successfully
completed. Tap Done to finish.
Adding the hub to the Home
Add an ELKO SmartHUB to a Home using the ELKO Smart app.
1. Log in to the app.
2. (See A) Select the Home to which the hub will be added.
3. (See B) In the Home page, tap the + icon.
Home Automations
My Home
Welcome Home
Set your home location for more information.
All devices
Living Room Master Bedroom
No devices. Please add a device.
Add Device
• • •
Home Away
A
B
SUG_ELKO_Norway_04 27