Elma Elmasteam 8 basic - Page 3

© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
3
6.3.2 Initial Filling with the Canister ............................ 54
6.4 Draining the Device .................................................. 55
7 Handling in Operation ..................................................... 57
7.1 Working with the Handpiece ..................................... 60
7.2 Working with the Fixed Nozzle ................................. 62
7.3 Operation with Saturated Steam wet/dry (option for
device with pump) ................................................................. 65
7.4 Programme Selection ............................................... 66
7.4.1 Selecting the Steam Outlet ................................ 67
7.4.2 Selecting Soft .................................................... 68
7.4.3 Selecting strong ................................................. 69
7.4.4 Selecting lock .................................................... 70
7.4.5 Service (Descaling) ............................................ 71
7.4.6 Settings ............................................................. 75
8 Safety / Maintenance / Repair Works ............................. 79
8.1 Regular Visual Controls............................................ 79
8.2 Flush the Pressure Vessel ....................................... 80
8.2.1 Cleaning the Sieve in the Water Connection ...... 83
8.3 Wear and Tear Parts ................................................ 84
8.3.1 O-ring in the Pressure Vessel Screw Cap .......... 84
8.3.2 O-ring Nozzle ..................................................... 84
8.3.3 Seal on the Collecting Tray ................................ 84
8.3.4 Hose (handpiece) .............................................. 84
8.4 Safety Valve ............................................................. 85
8.4.1 Inspect biannually .............................................. 85
8.4.2 Replacement every 3 years ............................... 86
8.5 Repair Works ........................................................... 87
8.6 Preparing the Device for Shipping ............................ 88
8.7 Troubleshooting ....................................................... 89
9 Decommissioning and Disposal ...................................... 92
10 Manufacturer´s Address / Contact Address .................... 92