Elma Elmasteam 8 basic - Selecting the Steam Outlet

Handling in Operation
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
67
7.4.1 Selecting the Steam Outlet
INFORMATION
Steam escapes permanently from the steam nozzle
when the steam button/foot switch are pressed for a
minimum of 2 seconds. Press the steam button/foot
switch again to interrupt the process. You can also
press the rotary knob to interrupt the process.
Figure 7.4.1: Programme selection, steam outlet
Function for discharging residual steam pressure. Before opening
the pressure vessel screw cap e.g. for manual refilling, before
emptying.
1. Set the rotary knob to
steam outlet
.
2. Press the rotary knob to confirm.
3. Discharge the residual steam pressure on the fixed nozzle
or handpiece.
4. Please observe the Chapter 7.1 Working with the
handpiece or the Chapter 7.2 Working with the fixed
nozzle.
Procedural
Method
A