Elma Elmasteam 8 basic - Operation with Saturated Steam wet;dry (option for device with pump)

Handling in Operation
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
65
7.3 Operation with Saturated Steam wet/dry
(option for device with pump)
CAREFUL
Hot steam escapes!
Risk of scalding!
• Handpiece
• Escaping steam must not pose a danger to people
or equipment.
• Pay attention to your own safety! Use caution
when the steam outlet is activated.
• Prevent any dangerous situations that may result
from inadvertent steam outlet.
INFORMATION
Saturated steam is available on the handpiece
(Chapter 7.1 Working with the handpiece).
Figure 7.3: Setting the saturated steam function
The percentage of moisture in the saturated steam is set by
utilising the rotary knob wet/dry.
Regulating the saturated steam proportion for the mixing ratio
of the saturated steam function.
Regulating the dry steam proportion for the mixing ratio of the
saturated steam function.
wet (A)
dry (B)
A B