Elma Elmasteam 8 basic - Safety, Maintenance, and Repair Works; Regular Visual Controls

Safety / Maintenance / Repair Works
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
79
8 Safety / Maintenance / Repair Works
Maintenance works are the responsibility of the user. Damage to
the device caused by not executing maintenance works are not
subject to the manufacturer's warranty!
8.1 Regular Visual Controls
INFORMATION
Visible damage to the unit!
• Inspect for visible damage on the device
components before putting the device into
operation.
• Do not operate the unit when there is any visible
damage.
• Send a defective device for repair to the service
centres of the manufacturer.
• Have damaged components replaced with original
parts from the manufacturer by a qualified
professional person.
The following components should be checked periodically for signs
of damage:
• The mains supply cable
• The foot switch and the electrical supply to the foot switch
• The steam hose (handpiece)
• O-ring of the pressure vessel screw cap (Chapter 8.3.1)
• O-ring of the nozzle (Chapter 8.3.2)
• Additionally inspect the optional water hose for correct securing
(fixed-water supply or canister).