Safety / Maintenance / Repair Works
BA_Elmasteam_8_Vers.07.2016 © Elma Schmidbauer GmbH
8.6 Preparing the Device for Shipping
If it is necessary to return the device to a service centre or to the
manufacturer, then the following points must be noted:
• Let the appliance cool down and empty it completely.
• Remove the connected accessory: Connections for canister,
fixed-water connection, foot switch, compressed air, mains
supply cable
• Disinfect the surfaces.
• Pack the unit securely for transport in a suitable container,
when possible in the original box.
To Next Page
Loading...
