Elma Elmasteam 8 basic - Page 63

Handling in Operation
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
63
Figure 7.2.1: Fixed Nozzle
Figure 7.2.2: Foot Switch
Steam operation with the fixed nozzle for soft, strong, steam outlet.
1. Hold a suitable bucket under the fixed nozzle (7.2.1-A) to
drain off any possible condensate water. Briefly press the
foot switch (7.2.2-B) until steam exits.
2. Press the foot switch (7.2.1-B) to start the steam function.
3. Moisten the material to be cleaned with steam from the
fixed nozzle (7.2.1-A).
4. Release the foot switch (7.2.2-B) to finish the steam
function.
Procedural Method
A
B