Elma Elmasteam 8 basic - Compressed Air and Solenoid Valve Issues

Safety / Maintenance / Repair Works
© Elma Schmidbauer GmbH BA_Elmasteam_8_Vers.07.2016
91
Malfunction Possible Cause Remedying
No compressed air
discharge possible with
actuation
• Steam pressure < 3 bar
• Compressed air is not
connected
• No compressed air supply
ready
• Wait until the device is ready
for operation (operating
pressure)
• Inspect the compressed air
connection
• Inspect the compressed air
supply
No steam discharge
possible with actuation
Device is ready for
operation
Steam mode soft or strong
is activated
• Solenoid valve defective • Send the device to the
service centre