29
INFORMATION [SECOND LAYER]
To display the model name of the camera.
To display the serial number of the camera.
FW : *.*.*
MainFPGA : *******
HeadFPGA : *******
To display the firmware version of the camera.
To display the information of the network mode.
To display SSID of the TX-1.
To display PSK key of the TX-1.
To display the number of available frequency
bandwidth.
To display the information of the network mode.
To display SSID of the Master device which the
TX-1 is connecting to.
To display WiFi strength.
To display IP address of the Master device.
To go back one layer in the menu.