ELNA 8600 - Rolled Hem

38
Rolled Hem
An easy, professional way to sew hems. The spiral on
the hemmer foot guides the fabric edge to create a rolled
hem. Recommended for fine, sheer fabrics used in bridal
wear.
Attach hemmer foot D.
Trim about 6.5 mm (1/4˝) from corners to reduce bulk.
Make a double 3 mm (1/8˝) fold approximately
8 cm (3˝) in length.
Align fabric hem edge with the inside of right extension
of foot q. Use this placement on foot as guide. Lower
presser foot. Sew 3 or 4 stitches while holding needle
and bobbin threads. Stop sewing.
Lower needle into fabric and raise presser foot. Insert
folded portion of fabric into spiral of foot w.
Lower presser foot and sew; lift up the edge of fabric to
keep it feeding smoothly.
NOTE: Use zigzag with stitch width 1.0 – 2.0 for
variation.
q
w
A Z
2 3
4
5 6
7 8 9
10
11 12
A
Auto
Adjust
3
1
SETSET
2 3
4
5 6
7 8 9
10
11 12
1
SET
?
Straight Stitch