88
Attaching Hoop to Carriage
Lift up the presser foot. Rotate the hoop turnkey q so it
lies parallel to the hoop. With the hoop turnkey turned
towards the back, slide the hoop from left side of
machine. Position the hoop pins w into the holes e on
the carriage.
Rotate the hoop turnkey clockwise to lock hoop onto
carriage.
CAUTION:
Always allow plenty of room behind the carriage so it can
move freely. See page 83.
Never try to move the carriage by hand or touch the
carriage when it is moving.
Always return the carriage to store position before
turning off the machine. See page 19.
start
stop
q
w
e
To Next Page
Loading...
