ELNA 8600 - Templates; Securing Fabric in Hoop

86
Templates
Each hoop comes with a template to help you place your
design where you want it on the fabric.
There are a variety of starting points visible on the
template. Find the one that is appropriate for your
machine/design.
q Starting point for built-in and PC design cards.
w Starting point for alphabets with horizontal
placement.
e Starting point for 100 series EnVision card and
for Elna EnVision CE20 and 8007.
r Boundary edges for built-in and PC design
cards.
NOTE: The four indentations t for fitting the template
onto the hoop do not correspond with any of the
reference lines.
STARTING POINT FOR MEMORY CARDS ( FROM No.1001 )
STARTING POINT FOR MEMORY CARDS ( FROM No.102 )
STARTING POINT FOR MONOGRAMMING
STARTING POINT
t
e
w
r
q
t
q
Securing Fabric in Hoop
Use a washable fabric marker or tailor’s chalk to draw
centerlines q on your fabric (see stabilizers on page
85).
Loosen the hoop tightening screw w and lift out the
inner hoop.
w