87
Fit the template e into the inner hoop. (L and R
markings on the inner hoop should be visible.) Place the
inner hoop and template over the fabric, matching the
centerlines.
Place the outer hoop on a flat surface. Position inner
hoop, template and fabric over the outer hoop.
Set inner hoop into outer hoop and slightly tighten the
hoop tightening screw r. Gently pull fabric taut in hoop,
respecting the fabric grain (vertical and horizontal).
Check fabric and template centerlines. Once fabric is
taut and properly positioned, tighten adjustment screw
with screwdriver.
Remove template from inner hoop.
r
e
To Next Page
Loading...
