MES53xx, MES33xx, MES23xx Ethernet Switch Series 122
Acct-Terminate-Cause (49)
The reason why the session is closed.
Show the client port type.
Terminal configuration mode commands
Command line prompt in the terminal configuration mode is as follows:
console(config-line)#
Table 5.117. Terminal configuration mode commands
login authentication
{default | list_name}
list_name: (1..12)
characters
Specify the log-in authentication method for console, telnet,
ssh.
- default - use the default list created by the 'aaa
authentication login default' command.
- list_name—use the list created by the 'aaa authentication
login list_name' command.
enable authentication
{default | list_name}
list_name: (1..12)
characters
Specify the user authentication method when privilege level is
escalated for console, telnet, ssh.
- default - use the default list created by the 'aaa
authentication login default' command.
- list_name - use the list created by the 'aaa authentication
login list_name' command.
password password
[encrypted]
password: (0..159)
characters
Specify the terminal password.
- encrypted - encrypted password (for example, an encrypted
password copied from another device).
Remove the terminal password.
Privileged EXEC mode commands
Command line prompt in the Privileged EXEC mode is as follows:
console#
Table 5.118. Privileged EXEC mode commands
show authentication
methods
Show information about switch authentication methods.
Show local user database and their privileges.
EXEC mode commands
Command line prompt in the EXEC mode is as follows:
console>
All commands from this section are available to the privileged users only.
Table 5.119. EXEC mode commands
Show information about configured accounting methods.