ELTEX MES23xx User Manual

MES53xx, MES33xx, MES23xx Ethernet Switch Series 39
Use the following command to view the community strings and SNMP settings:
console# show snmp
SNMP is enabled.
SNMP traps Source IPv4 interface:
SNMP informs Source IPv4 interface:
SNMP traps Source IPv6 interface:
SNMP informs Source IPv6 interface:
Community-String Community-Access View name IP address Mask
-------------------- ------------------ -------------- ------------ ------------
private read write Default 192.168.16.1
44
Community-String Group name IP address Mask Version Type
------------------ ------------ ---------------- ---------------- ------- ------
Traps are enabled.
Authentication-failure trap is enabled.
Version 1,2 notifications
Target Address Type Community Version Udp Filter To Retries
Port name Sec
---------------- -------- ----------- ---------- ----- ------- ----- ---------
Version 3 notifications
Target Address Type Username Security Udp Filter To Retries
Level Port name Sec
---------------- -------- ----------- -------- ----- ------- ----- ---------
System Contact:
System Location:
4.5.2 Security system configuration
To ensure system security, the switch uses AAA mechanism (Authentication, Authorization,
Accounting). The SSH mechanism is used for data encryption.
– Authentication—the process of mapping with the existing account in the security system.
– Authorization (access level verification)—the process of defining specific privileges for the
existing account (already authorized) in the system.
– Accounting—user resource consumption monitoring.
The default user name is admin and default password is admin. The password is assigned by the
user. If you lose your password, you can restart the device and interrupt its startup via the serial port by
pressing the <Esc> or <Enter> keys in two seconds after the automatic startup message is displayed. The
Startup menu will open where you can initiate password recovery procedure ([2]).
To ensure basic security, you can define the password for the following services:
– Console (serial port connection)
– Telnet;
– SSH.
4.5.2.1 Setting console password
console(config)# aaa authentication login default line

ELTEX MES23xx Specifications

General

Brand	ELTEX
Model	MES23xx
Category	Switch
Language	English