ELTEX MES23xx User Manual

MES53xx, MES33xx, MES23xx Ethernet Switch Series 85
Table 5.65. Ethernet interface and interface group configuration mode commands
Command
Value/Default value
Action
gvrp enable
-/disabled
Enable GVRP on the interface.
no gvrp enable
Disable GVRP on the interface.
gvrp vlan-creation-forbid
-/enabled
Disable dynamic VLAN modification or creation for the
interface.
no gvrp

Enable dynamic VLAN modification or creation for the
interface.
gvrp registration-forbid
Be default, VLAN creation
and registration is enabled
on the interface.
Cancel registration of all VLANs and disable creation or
registration of new VLANs on the interface.
no gvrp registration-forbid
Set the default value.
Privileged EXEC mode commands
Command line prompt in the Privileged EXEC mode is as follows:
console#
Table 5.66. Privileged EXEC mode commands
Command
Value/Default value
Action
clear gvrp statistics
[gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group]
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..8)
Clear collected GVRP statistics.
EXEC mode commands
Command line prompt in the EXEC mode is as follows:
console>
Table 5.67. EXEC mode commands
Command
Value/Default value
Action
show gvrp configuration
[gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group |
detailed]
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16)
Show GVRP configuration for a specific interface or for all
interfaces.
show gvrp statistics
[gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group]
Show collected GVRP statistics for a specific interface or for
all interfaces.
show gvrp error-statistics
[gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group]
Show GVRP error statistics for a specific interface or for all
interfaces.
5.16.4 Loopback detection mechanism
This mechanism allows the device to detect loopback ports. The switch detects port loopbacks by
sending a frame with the destination address that match one of the device MAC addresses.
Global configuration mode commands
Command line prompt in the global configuration mode is as follows:

ELTEX MES23xx Specifications

General

Brand	ELTEX
Model	MES23xx
Category	Switch
Language	English