MES53xx, MES33xx, MES23xx Ethernet Switch Series 188
console(config)# interface tengigabitethernet 1/0/14
console(config-if)# service-policy input
console(config-if)# exit
console(config)# interface tengigabitethernet 1/0/16
console(config-if)# service-policy input
console(config-if)# exit
console(config)#
11.5.2 QoS Statistics
Global configuration mode commands
Command line prompt in the global configuration mode is as follows:
console(config)#
Table 5.218. Global configuration mode commands.
qos statistics
aggregate_policer_name
aggregate_policer_name:
(1..32) characters
QoS statistics is disabled by
default.
Enable QoS statistics on bandwidth limits.
no qos statistics
aggregate_policer_name
Disable QoS statistics on bandwidth limits.
qos statistics queue sset
{queue | all} {dp | all}
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
all}
set: (1..2);
queue: (1..8);
dp: (high, low);
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
Default value:
set 1: all priorities, all
queues, high drop priority.
set 2: all priorities, all
queues, low drop priority.
Enable QoS statistics for transmit queues.
- set - define a set of counters;
- queue - specifies the transmit queue;
- dp - define drop priority.
no qos statistics queues set
Disable QoS statistics for outgoing queues.
Ethernet or port group interface configuration mode commands
Command line prompt in the Ethernet or port group interface configuration mode is as follows:
console(config-if)#
Table 5.219. Ethernet interface configuration mode commands.
qos statistics policer
policy_map_name
class_map_name
policy_map_name: (1..32)
characters
class_map_name: (1..32)
characters
QoS statistics is disabled by
default.
Enables QoS statistics for the interface.
- policy-map_name - traffic classification strategy;
- class_map_name - list of criteria used for traffic
classification.
no qos statistics policer
policy_map_name
class_map_name
Disable QoS statistics for the interface.
EXEC mode commands
Command line prompt in the EXEC mode is as follows:
console#
Table 5.220. EXEC mode commands.