EasyManua.ls Logo

EMC VNX5300 - SP AC Power Supply

EMC VNX5300
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
VNX5300 DPE 15 and 25 disk front LEDs
3U, 15 disk processor
DPE Fault
LED
Disk drive
Power/Activity LED
DPE Power
LED
Disk drive
Fault LED
3U, 25 disk processor
DPE Fault
LED
DPE Power
LED
Disk drive
Power/Activity LED
Disk drive
Fault LED
The power-up should take around 10-15 minutes. If the power LEDs do not remain solid/steady
green, contact your authorized service provider. If the power LEDs on each SP remain solid/
steady green, replace the bezel and proceed with the next steps.
Light emitting diodes Color Status
Enclosure Power LED
• Green [15-drive]
• Blue [25-drive]
AC or DC is applied and all outputs are in
operating range
Off Any or all outputs or input out of range
Enclosure Fault LED
Off All outputs or input out of range
Amber Any enclosure fault, including SP faults

Table of Contents

Other manuals for EMC VNX5300

Related product manuals