35
Update software
Your storage system shipped from the factory with the latest version of the VNX Operating
Environment software available at that time. Use the Software Upgrade Assistant wizard to
determine whether you need to install an operating environment (OE) patch. If you purchased
optional VNX SnapView™, VNX MirrorView™, or VNX SAN Copy™ software, use the wizard
to install enabler software for those products.
The Software Upgrade Assistant wizard is part of the Unisphere Service Manager.
Install the Unisphere Service Manager
1. Download the Unisphere Service Manager (USM) from the Support by Product > Software
Downloads page for your storage system.
a. On the VNX Product page, select your system.
b. Select Unisphere Service Manager and select the option to save the software to host or
client.
c. In the folder where you saved the USM, double-click the executable fi le, and
if necessary, click Run to start the installation wizard.
d. Follow the instructions that appear.
e. After you accept the license agreement, the wizard verifi es that the server is
running the supported Java Runtime Environment (JRE) version.
• If the server is running an earlier version of the JRE, select Yes when asked if you want
to continue with the installation. The installation wizard prompts you to download and
install the latest version of the JRE from the Sun website.
• If the server is running a later version of the JRE, the installation wizard asks if you want
to continue with the installation. Select Yes to continue or No to quit the installation.
Note: If you select Yes, the USM may not work properly with a later JRE version. If you select No,
and manually remove the later version of the JRE, other applications that require this version may
not work properly.
2. When the installation is complete, click Done.
To Next Page
Loading...
