EMC VNX5300 - SP Input;Output Ports and Connectors

24
Disk processor rear
Power
supply
Power supply
fault
1 X4
2
3
4
5
6Gb
SAS
8Gb
bre
0 X4
6Gb SAS
A
2
3
4
5
6Gb
SAS
8Gb
bre
0 X4
6Gb SAS
B
SAS
port
status
Storage
processor
power
SAS
port
status
1 X4
Storage
processor
fault/status
0
1
2
3
0
1
2
3
0
1
2
3
0
1
2
3
VNX5300 DPE rear LEDs
The power-up should take around 10-15 minutes.
Physical indications that the array is up and running without error:
a. Power LED on SP is green
b. Fault LED on SP is off
c. DPE status is steady green or blue
d. First 4 drives in DPE are green (for 3u-15 drive unit) or blue (for 3U 25-drive
unit)
For complete information on the DPE LEDs and their activity, see the VNX5300 Hard-
ware Overview.