44
Note: The Provisioning wizards can be launched and used as often as necessary to provision
storage, to create an NFS export, create a CIFS (Windows) share, and set up your MPFS system
(for MPFS-supported systems only).
Complete this worksheet and use the information here to provision storage, create an NFS
export, create a CIFS (Windows) share, or set up your MPFS system (for MPFS-supported sys-
tems only) using the Provisioning Wizard.
If you want to provision storage using the Provisioning Wizard, complete this section. Storage
provisioning involves creating RAID groups and LUNs.
Blade name
IP Address to be assigned to the
newly-created interface
Netmask address
MTU (optional; default is 1500)
VLAN ID (optional; default is 0)
Provision unused disks
Network Confi guration
Network device name
Create and use new network device
Network device settings
Device name
Ports
Network Device
Provisioning of the storage available through the VNX depends on individual site
requirements. You can perform provisioning via the Provisioning Wizard or Unisphere. You can
also add additional storage and perform additional provisioning later. See the documentation
and videos available on the VNX product page on the EMC Support site.
Provisioning Wizard Worksheet
To Next Page
Loading...
