EMC VNX5300 - The 3 U, 15 (3.5-inch) DAE Front View

58
4 ports
Copper
1 GbE
0
1
23
PART NUM BER
REV A09 A
PART NUM BER
REV A09 A
1
0
2 port
10 GbE
0
123
PART NUM BER
REV A09 A
4 port
Fibre Channel
2-4-8 Gb
PART NUM BER
REV A09 A
01
4 ports
2 port optical
2 port copper
1 GbE
2
3
Management
module
Slot 1 Slot 2 Slot 4 Slot 4Slot 0
0
1
23
0
1
23
0
1
23
0
1
23
Blade enclosure Rear
Slot 3 Slot 3
Management
module
0
123
0
123
Slot 1 Slot 2Slot 0
VNX5300 blade modules
The data movers in the VNX5300 can support up to 3 I/O modules. Slot 0 is populated with
a 4-port FC I/O module. Slots 1-2 can be used for an assortment of UltraFlex I/O modules.
Because blades should be confi gured for failover, the blades should have the same I/O modules
in the same slots.
For details on the I/O module options, see the VNX5300 Hardware Overview.