43
Note: The dial-in modem number is the phone number for the line that connects to the
modem. This is the local number that is used by the service provider to dial into your system.
Note: Email will not work without a DNS server.
3. The appropriate blade public LAN settings are auto-discovered.
4. Record the storage processor public LAN IP addresses.
DNS domain
Primary DNS server
Secondary DNS server
NTP server
SP A IP address
SP B IP address
Note: Public IP addresses for your storage processors are required for use with the Unisphere
for Block Service Taskbar for routine array maintenance and upgrades. In addition, for VNX
for File systems where Unisphere for Block licenses are in place, Navisphere can be used to
manage storage for external host connectivity, and the VNX for File. However, we recommend
users manage VNX for File storage using the Provisioning Wizard capability within the VNX
Installation Assistant or within Unisphere. The IP addresses must be on the same subnet as the
Control Station.
5. If applicable, confi gure service provider/customer notifi cation information.
Service provider/
customer notifi cation
Email Server (recommended)
Recipient Email Addresses (optional)
Site information Site ID (optional) (party name)
Dial-in Modem # (optional)
Note: These settings apply to all primary blades.
6. Check the boxes of the licenses that you have purchased.
CIFS (Windows)
NFS (Linux)
At this point, the installation and pre-confi guration portions of VNX Installation Assistant for File/Uni-
fi ed are complete.
VNX Installation Assistant for File/Unifi ed Worksheet
To Next Page
Loading...
