EMC VNX5300 - VNX Installation Assistant for File;Unified Worksheet; Record the Appropriate Control Station Public LAN Settings; The Passwords

42
VNX Installation Assistant for File/Unifi ed Worksheet
1. Record the appropriate Control Station public LAN settings.
Primary hostname
Primary IP address
(For second Control Station only)
Secondary hostname
(For second Control Station only)
Secondary IP address
Netmask
Gateway
DNS domain
Primary DNS server
Secondary DNS server
NTP server
Time Zone
The VNX Installation Assistant for File/Unifi ed pre-populates values based on auto-discovery from
your Windows client. Shaded fi elds below are values that will be auto-discovered based on your sys-
tem and network environment; if auto-discovery fails, you need to provide the information manually.
Complete this worksheet and use the information to install, using the VNX Installation Assistant for
File/Unifi ed. Download the latest version of the VNX Installation Assistant for File/Unifi ed from the
Support section of the EMC Online Support site. Getting Started with VNX Installation Assistant for
File/Unifi ed provides more information on the VNX Installation Assistant for File and Unifi ed pre-
confi guration and provisioning processes.
2. The passwords for the root user, NAS administrator (nasadmin) and System administrator
(sysadmin) for backend array access are default factory values and should be changed as soon as
possible for security reasons. The passwords can be changed during the VNX Installation Assistant
for File/Unifi ed installation process or later, from within Unisphere.
root_password (default value = nasadmin)
NAS Administrator (default value = nasadmin)
System Administrator for backend array access
(default value = sysadmin)
Field Value
Note: If you want to confi gure the IPv6 addresses for the Control Station (Control Station
address, DNS, or NTP) or for the Data Movers (DNS or NTP), use the VNX Installation Assistant for
File/Unifi ed for the initial installation and then refer to the Confi guring and Managing Networking on
VNX technical module and EMC VNX Command Line Interface Reference for File to complete the
IPv6 additions.