B Product certifications
Rev 2.11
B.1 European directive information
The most recent revision of the EU Declaration of Conformity can be found at
Emerson.com/Rosemount.
B.2 Ordinary location certification
As standard, the transmitter has been examined and tested to determine that the design
meets the basic electrical, mechanical, and fire protection requirements by a nationally
recognized test laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
B.3 Installing equipment in North America
The US National Electrical Code
®
(NEC) and the Canadian Electrical Code (CEC) permit the
use of Division marked equipment in Zones and Zone marked equipment in Divisions. The
markings must be suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
Reference Manual Product certifications
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 135
To Next Page
Loading...
