Emerson Rosemount 2410 - Advanced Configuration; Configuration Using Tankmaster Winsetup

4.5 Advanced configuration
The installation wizard in TankMaster Winsetup comprises a basic configuration of the
Rosemount 2410. There are more options available in case further configuration is
needed:
• Primary/Secondary Bus configuration
• Up to ten “virtual” Relay Functions
• Hybrid Density
• Delta Level
• Analog Output
• Analog Input / HART Slave
(12)
Related information
Advanced configuration
4.6 Configuration using TankMaster WinSetup
A Rosemount 2410 Tank Hub can easily be installed and configured by using the
TankMaster Winsetup configuration program. The WinSetup installation wizard guides
you through the basic configuration needed for starting up a Rosemount 2410.
See the Rosemount Tank Gauging System Configuration Manual (Document no.
00809-0300-5100) for more information on using the TankMaster WinSetup software to
configure a Rosemount Tank Gauging system and a Rosemount 2410 Tank Hub.
See also the Rosemount Tank Gauging Wireless System Reference Manual (Document no.
00809-0100-5200) for information on how to set up a WirelessHART
®
system.
4.6.1
Installation wizard
The TankMaster WinSetup wizard is the recommended tool for installing the Rosemount
2410 and supports basic configuration. To start the installation wizard:
(12) Analog Input and HART Slave functions are configured in the Properties window of Auxiliary Tank Device (ATD), see
Configuration of analog input / HART
®
slave device.
Configuration Reference Manual
December 2019 00809-0100-2410
66 Reference Manual