3.3 Mechanical installation
The Rosemount 2410 is designed for mounting on a pipe stand or on a wall.
3.3.1 Pipe mounting
Prerequisites
Note
Ensure that the Rosemount 2410 is installed to minimize vibration and mechanical shock.
Procedure
1. Attach the bracket to the pipe.
Ensure that the Rosemount 2410 Tank Hub is placed in a direction so that the
display is clearly visible and wiring can be properly connected.
A. 1 - 2 inches
B. 4 nuts and washers
C. Bracket
2. Tighten the nuts. Use moderate torque to ensure that the bracket does not break.
3. Attach the tank hub to the bracket by sliding it from the top downwards.
Reference Manual Installation
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 27
To Next Page
Loading...
