Emerson Rosemount 2410 - Access the Advanced Configuration Options in Winsetup

C.2 Access the advanced configuration options in
WinSetup
There are advanced configuration options for the Rosemount
™
2410 Tank Hub which are
not included in the TankMaster WinSetup installation wizard. These options are available
via the Properties option in the WinSetup configuration software.
Procedure
1. In the TankMaster WinSetup workspace, right-click the Rosemount 2410 Tank Hub
icon.
2. Choose the Properties option.
The 2410 Tank Hub window appears.
3. Select the Configuration tab.
The Configuration window contains buttons for Primary and Secondary Bus, Virtual
Relays, and Hybrid Density calculation.
Related information
Change the communication parameters for the primary bus
Open the secondary bus window
Configure a virtual relay output
Set up a Rosemount 2410 for hybrid density applications
Advanced configuration Reference Manual
December 2019 00809-0100-2410
160 Reference Manual