Emerson Rosemount 2410 - Configure the Analog Output

Figure C-5: The Result is Displayed in Input Register 4800 and Higher
A. The result is displayed in Input Register 4800.
B. Parameter A
C. Parameter B
Related information
Configure a virtual relay output
C.9 Configure the analog output
To configure the Rosemount 2410 Tank Hub analog output:
Procedure
1. In the TankMaster Winsetup workspace, right-click the Rosemount 2410 icon.
2. Choose the Properties option.
3. Select the Configuration tab.
4. Click the Analog Output button to open the Analog Output Configuration window.
Note
This button is available if the Analog Output option is activated for the Rosemount
2410 Tank Hub.
Reference Manual Advanced configuration
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 179