4.4 Basic configuration of a Rosemount 2410 Tank
Hub
This is a general description of how to configure a Rosemount 2410 Tank Hub. The
Rosemount Tank Gauging System Configuration Manual (Document no.
00809-0300-5100) provides a detailed description of how to use the Rosemount
TankMaster WinSetup program as a configuration tool for the Rosemount 2410.
Communication
Depending on the particular system configuration, a Rosemount 2410 Tank Hub may
communicate directly with a host computer or via a Rosemount 2460 System Hub.
In case the Rosemount 2410 is connected to a Rosemount 2460 System Hub, you will have
to specify which communication protocol channel to be used.
The Rosemount 2410 has default Modbus
®
address=247. The address should be changed
to the recommended address range. The Modbus address must match the address
specified in the Rosemount 2460’s tank database.
The Rosemount 2410 Tank Hub can be used in a WirelessHART system by connecting an
Emerson Wireless THUM
™
Adapter. The THUM adapter allows the Rosemount 2410 to
communicate with a host system via an Emerson Wireless Gateway.
Tank database
The Rosemount 2410 has a tank database that maps field devices to tanks. It also stores
Modbus addresses of level gauges and auxiliary tank devices (ATD) such as the Rosemount
2240S Multi-input Temperature Transmitter. The Modbus addresses are used for
communication with Rosemount 2460 System Hub and host computers.
Device tags
For each tank, device tags are specified for the level gauge and the auxiliary tank devices
(ATD). ATD devices include all instruments on the tank except the level gauge. Device tags
are used as identifiers in TankMaster.
Integral display
The Rosemount 2410 can be configured to present measurement data on the optional
integral display. The display alternates between the selected items at a rate given by the
Display Toggle Time parameter.
Measurement data such as Level, Level Rate, Free Water Level and many other tank
variables can be displayed.
Measurement units for Level, Level Rate, Volume, Temperature, Density, and Pressure can
be specified regardless of which units are used for presentation in, for example, the
TankMaster programs.
Reference Manual Configuration
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 65
To Next Page
Loading...
