Procedure
1. In the WinSetup workspace select the Devices folder.
2. Right-click and select Install New, or from the menu bar select Devices → Install
New.
3. Choose device type Rosemount 2410 Tank Hub.
4. Follow the instructions in the installation wizard.
Need help?
See the Rosemount Tank Gauging System Configuration Manual (Document no.
00809-0300-5100) for more information on using the TankMaster WinSetup
program to configure the Rosemount 2410.
4.6.2
Advanced configuration
Advanced options such as the Secondary Bus, Relay Output and Hybrid Density are
available in the Rosemount 2410 Properties window. See Advanced configuration for more
information.
4.6.3
Installing a Rosemount 2460 System Hub
In case the Rosemount Tank Gauging system includes a Rosemount 2460 System Hub, it
should be installed prior to installing the Rosemount 2410 Tank Hub. Installation includes
the following basic steps:
Prerequisites
Ensure that the Rosemount TankMaster WinSetup program is up and running.
Procedure
1. Enable and configure a Protocol Channel in order to establish communication with
the appropriate port on the TankMaster PC.
2. Start the installation wizard in TankMaster WinSetup.
a) Right-click the Devices folder.
Reference Manual Configuration
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 67
To Next Page
Loading...
