Figure C-3: Input Register View for Volume Read-out in TankMaster WinSetup
The volume values are also available in input register area starting with IR30000 (IR30148
for tank 1).
Related information
Viewing input and holding registers using TankMaster
Enable volume calculation in a Rosemount 2410 Tank Hub
For application software version 1.B5 and older, tank volume calculation has to be enabled
by setting bit 31 "TANK_VOLUME" in Holding Register 6136.
Procedure
1. In the TankMaster Winsetup workspace, right-click the Rosemount 2410 icon.
2. Choose the View Holding Registers option.
3. In the Start Register box, type 6136, and then click the Read button.
Advanced configuration Reference Manual
December 2019 00809-0100-2410
174 Reference Manual
To Next Page
Loading...
