6. Click the Individual Tank Configuration button in case you would like to specify
different display settings for different tanks.
7. Click the OK button to save the configuration and close the window.
8. In the Rosemount 2410 Tank Hub window click the OK button to save the
configuration and close the window.
Need help?
See the Rosemount Tank Gauging System Configuration Manual (Document no.
00809-0300-5100) for more information on using the TankMaster Winsetup PC software
to configure the Rosemount 2410 Tank Hub.
Operation Reference Manual
December 2019 00809-0100-2410
78 Reference Manual
To Next Page
Loading...
