6.2.5 Recover a backup configuration database using
TankMaster
™
Rosemount TankMaster WinSetup lets you replace the current Holding Register database
with a backup database stored on disk. This can be useful, for example, if you want to
recover lost configuration data.
To load a Holding Register database do the following:
Procedure
1. In the TankMaster WinSetup workspace window, select the device icon.
2. Right-click and select Upload Database, or from the Service menu choose Devices/
Upload Database.
3. Click the Browse button and choose a database file to be uploaded, or type a path
and file name.
4. Click the Upload button.
6.2.6
View and configure diagnostic registers using
TankMaster
™
The Rosemount TankMaster WinSetup program lets you view the current device status.
The View Diagnostic Register window shows a selection of database registers that gives you
an instant view of how the gauge operates. You may also configure the window by adding
registers of special interest.
Procedure
1. In the TankMaster WinSetup workspace window, right-click the device icon.
Service and troubleshooting Reference Manual
December 2019 00809-0100-2410
84 Reference Manual
To Next Page
Loading...
