To Next Page

To Previous Page

INTRODUCTION

For Access

Enter Code:

Press To Complete

* Welcome Service *

Access Level 3

Now Available

All Buttons Active

Access level 3 entry

A valid user access code is required for access level 3. One entered the full service menu access structure is

available at this level. This is shown and detailed fully in this programming manual.

To enter access level 3 press the button. The display will change to show:

Press the relevant numbered arrows to enter the access level 3 access code required ( 1= , 2= , 3= ,

4= ). Access level 3 default access code is 333333. On completion of the last number entered, press the .

button. The display will change to briefly show the display below, then the relevant menu options will be

available. During this display all buttons are immediately active.

By selecting the access level 3 option and entering the correct access 3 entry code additional menus will be

available.

View System Status

Maintenance/Test

Device Options

WZM Settings

Example menu display

An example display is shown below:

The menus can be navigated by pressing the and buttons until the desired option to be entered has

the arrow ( ) adjacent to it. Pressing the button enters this option.

Exiting from a menu option is achieved automatically aer two minutes, or by pressing the button.

INTRODUCTION

EMS SmartCell Programming Guide

Other manuals for EMS SmartCell