©2020 EMS Ltd. All rights reserved. Page 43 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
SYSTEM SETUP
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Off When Silenced
Off When Reset
Off When Silenced
Off When Reset
If the indicators are to be switched ‘Off When Reset’, from
access level 3 (refer to the ‘Access level 3’ section for details),
press the button until the screen displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Device indicator operation
This feature is only available when the ‘Panel Type’ is set to ‘Addressable’. As default, the device LED
indicators are switched ‘Off When Silenced’ (upon receipt of a silence command signal from the control
panel). Alternatively ‘Off When Reset’ can be selected (where the device LED indicators switch off upon the
receipt of a reset command signal from the control panel .
Panel Type
Sounder Options
Device Indicator
Fire Status
Turned Off
When Reset
To Next Page
Loading...
Need help?
General