©2020 EMS Ltd. All rights reserved. Page 40 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Default Tone Select
Sounder Duration
Sounder Activation
Pulsed Output
Default Tone Select
Sounder Duration
Sounder Activation
Pulsed Output
If the sounder activation method is to be changed to
immediate mode, from access level 3 (refer to the ‘Access level
3’ section for details), press the button until the screen
displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Sounder activation method
As default, wireless sounders will only operate upon activation of the WZM’s fire input. This however can be
changed to ‘immediate mode’, so that sounders also operate upon the activation of one of the WZM’s
wireless devices.
Panel Type
Sounder Options
Device Indicator
Panel Mode
Immediate Mode
Panel Mode
Immediate Mode
Sounder Activation
Set To
Immediate Mode
To Next Page
Loading...
Need help?
General