EMS SmartCell - Sounder Tones

©2020 EMS Ltd. All rights reserved. Page 38 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Panel Type
Sounder Options
Device Indicator
Default Tone Select
Sounder Duration
Sounder Activation
Pulsed Output
Fire Tone - 05
970Hz - 630Hz, @1Hz
05
Tone To Select
800Hz - 970Hz, @1Hz
03
Tone To Select
Sounder tones
To change the fire tone, from access level 3 (refer to the
‘Access level 3’ section for details), press the
button until the screen displays:
Press the button and the screen will display:
Press the button until the screen displays:
Press the button and the screen will display:
Press the button and the screen will display:
Press the button and the screen will display :
Press the and buttons to view the available
tones and press the button to select the required tone:
3
3
1
3