©2020 EMS Ltd. All rights reserved. Page 39 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
SYSTEM SETUP
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Default Tone Select
Sounder Duration
Sounder Activation
Pulsed Output
Default Tone Select
Sounder Duration
Sounder Activation
Pulsed Output
If the sounder duration is to be changed to continuous
operation, from access level 3 (refer to the ‘Access level 3’
section for details), press the button until the screen
displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Press the button until the screen will displays:
Press the button and the screen will display:
Sounder duration
As default, wireless sounders automatically switch off aer 30 minutes, to conserve battery life. Sounders
can also be configured for continuous uninterrupted operation, until switched off by the control panel.
Panel Type
Sounder Options
Device Indicator
30 Mins Auto Off
Continuous
30 Mins Auto Off
Continuous
Sounder Duration
Set To
Continuous
To Next Page
Loading...
Need help?
General