EMS SmartCell Programming Guide

©2020 EMS Ltd. All rights reserved. Page 33 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
SYSTEM SETUP
INPUT
L N E
14
0359-CPR-XXXX
0905
View System Status
Maintenance/Test
Device Options
WZM Settings
Add New Device
Remove Device
Edit Settings
Signal Level Test
Add New Device
Remove Device
Edit Settings
Signal Level Test
A01 ID:001234
Sounder Detector
ID:001234
Devices Change>
A03 ID:001236
Sounder Detector
Beacon ID:001236
Devices Change>
Text Description
Detection- Dual
Smoke Sen- Normal
Heat Sen- 58C S
Device attributes
From access level 3 (refer to the ‘Access Level 3’ section for
details), press the button until the screen displays:
Press the button and the screen will display:
Press the button until the screen displays:
Press the button and the screen will display:
Press the button until the device to configure is
shown. Press the button and the screen will display:
Press the button and the screen will display:
Available options for each device type are shown overleaf.
3
3
3

EMS SmartCell Specifications

General

Brand	EMS
Model	SmartCell
Category	Monitor
Language	English