EMS SmartCell Programming Guide

©2020 EMS Ltd. All rights reserved. Page 35 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
SYSTEM SETUP
View System Status
Maintenance/Test
Device Options
WZM Settings
Add New Device
Remove Device
Edit Settings
Signal Level Test
Add New Device
Remove Device
Edit Settings
Signal Level Test
A01 ID:001234
Sounder Detector
ID:001234
Devices Change>
Text Description
Detection- Dual
Smoke Sen- Normal
Heat Sen- 58C S
Dual Detector
ID:001234
F1 ABC F2 Delete
Device location text
From access level 3 (refer to the ‘Access Level 3’ section for
details), press the button until the screen displays:
Press the button and the screen will display:
Press the button until the screen displays:
Press the button and the screen will display the first
device logged on to the system:
Press the button to scroll through the devices until
the required device is shown. Press the button:
Press the button and the screen will display:
Press the button and the screen will display:
3
3
3
Refer to the ‘Text entry’ section overleaf.

EMS SmartCell Specifications

General

Brand	EMS
Model	SmartCell
Category	Monitor
Language	English