7.1.9 DATA Screen View
Data Screen Options
General: DATA STORAGE
The P100 will store up to 500 samples in it’s internal memory. A warning will occur at power up,
which requires acknowledgement, when memory hits 450 samples. The CPU will delete oldest sample
runs to add new ones once 500 samples has been stored in the memory, or will prevent new runs from
being taken once 500 runs have been stored. This is an Admin Control setting option (described
further in the Admin Controls Section).
Line 1: #SAMPLES TO OUTPUT: Enter number of stored samples to output from unit memory (enter 1-500)
through the numeric keypad.
DATA Keypad Views/Entry
#SAMPLE TO OUTPUT
#SAMPLES: Enter the number of samples to output from left to right, as follows: 1_ _, 10_, 100
Line 2: OUTPUT: Select output option of USB or Printer.
To Next Page
Loading...
Need help?
General