Emtek P100 - Infrared Red (IR) Remote Control

P100 USERS MANUAL JUN2014v03
44
7.2 Infrared Red (IR) Remote Control
Fig 7.2.1
IR Remote Control
Table 7.2.1 Functions of Remote Control
Operation of 1 to 5 P100 Units
Button
Name
Description
Unit IR
Setting #
 
Sample On / Pause
Initiate / Pause / Resume sample period
Selected

Sample Abort/End
End or Abort sample period
Selected
1
Unit 1
Identifies Unit 1 for On/Off and Pause/Resume Functions
1
2
Unit 2
Identifies Unit 2 for On/Off and Pause/Resume Functions
2
3
Unit 3
Identifies Unit 3 for On/Off and Pause/Resume Functions
3
4
Unit 4
Identifies Unit 4 for On/Off and Pause/Resume Functions
4
5
Unit 5
Identifies Unit 5 for On/Off and Pause/Resume Functions
5
7.2.1 Loading the Batteries into the Remote Control
1. Remove the battery cover.
2. Insert two AAA batteries. Ensure that the poles (+ and -) are correctly positioned.
3. Replace the battery cover.