Enclustra Mars ZX3 - Article Numbers and Article Codes; Product Code Fields; Module Label; Standard Module Configurations

Product Code SoC DDR3/DDR3L SDRAM Temperature Range
MA-ZX3-20-1C-D9 XC7Z020-1CLG484C 512 MB 0 to +70
◦
C
MA-ZX3-20-2I-D10 XC7Z020-2CLG484I 1024 MB -40 to +85
◦
C
Table 1: Standard Module Configurations
The product code indicates the module type and main features. Figure 2 describes the fields within the
product code.
Figure 2: Product Code Fields
Please note that for the first revision modules or early access modules, the product code may not respect
entirely this naming convention. Please contact Enclustra for details on this aspect.
2.3 Article Numbers and Article Codes
Every module is uniquely labeled, showing the article number and serial number. An example is presented
in Figure 3.
Figure 3: Module Label
The correspondence between article number and article code is shown in Table 2. The article code repre-
sents the product code, followed by the revision; the R suffix and number represent the revision number.
The revision changes and product known issues are described in the Mars ZX3 SoC Module Known Issues
and Changes document [6].
D-0000-424-004 10 / 48 Version 05, 21.08.2018