Enclustra Mars ZX3 - Electrostatic Discharge; Electromagnetic Compatibility; Features; Deliverables

Warning!
Use the Mars ZX3 SoC module only with base boards designed for the Enclustra Mars module family.
Inserting the Mars ZX3 SoC module into a SO-DIMM connector designed for memory (e.g. a computer
main board) may damage the module and the carrier board.
1.1.6 Electrostatic Discharge
Electronic boards are sensitive to electrostatic discharge (ESD). Please ensure that the product is handled
with care and only in an ESD-protected environment.
1.1.7 Electromagnetic Compatibility
The Mars ZX3 SoC module is a Class A product and is not intended for use in domestic environments. The
product may cause electromagnetic interference, for which appropriate measures must be taken.
1.2 Features
• Xilinx Zynq®-7020 All Programmable SoC, CLG484 package
• Dual ARM® Cortex™-A9 MPCore™with CoreSight™ and NEON™ extension
• Xilinx Artix-7 28 nm FPGA fabric
• 108 user I/Os up to 3.3 V
• 12 ARM peripheral I/Os (SPI, SDIO, CAN, I2C, UART) shared with FPGA I/Os
• 96 FPGA I/Os (single-ended, differential or analog)
• Up to 1 GB DDR3 SDRAM
• 512 MB NAND flash
• 64 MB quad SPI flash
• Gigabit Ethernet
• USB 2.0 On-The-Go (OTG)
• Real-time clock
• SO-DIMM form factor (30 × 67.6 mm, 200 pins)
• The module can be operated using a single 3.3 V supply voltage
1.3 Deliverables
• Mars ZX3 SoC module
• Mars ZX3 SoC module documentation, available via download:
• Mars ZX3 SoC Module User Manual (this document)
• Mars ZX3 SoC Module Reference Design [2]
• Mars ZX3 SoC Module IO Net Length Excel Sheet [3]
• Mars ZX3 SoC Module FPGA Pinout Excel Sheet [4]
• Mars ZX3 SoC Module User Schematics (PDF) [5]
• Mars ZX3 SoC Module Known Issues and Changes [6]
• Mars ZX3 SoC Module Footprint (Altium, Eagle, Orcad and PADS) [7]
• Mars ZX3 SoC Module 3D Model (PDF) [8]
• Mars ZX3 SoC Module STEP 3D Model [9]
• Module Pin Connection Guidelines [10]
• Mars Master Pinout [11]
• Enclustra Modules Heat Sink Application Note [17]
• Enclustra Build Environment [15] (Linux build environment; refer to Section 1.4.2 for details)
D-0000-424-004 6 / 48 Version 05, 21.08.2018