Module Product Family Reserved Revision Product Information
Mercury+ XU1 SoC module 0x032F 0x[XX] 0x[YY] 0x032F [XX][YY]
Table 45: Product Information
Module Configuration
Addr. Bits Comment Min. Value Max. Value Comment
0x08
7-4 MPSoC type 0 4 See MPSoC type table
(Table 47)
3-0 MPSoC device speed grade 1 3
0x09
7-6 Temperature range 0 2 See temperature
range table (Table 48)
5 Power grade 0 (Normal) 1 (Low power)
4-3 Gigabit Ethernet port count 0 2
2 RTC equipped 0 1
1 Extended MGT routing
26
0 (No) 1 (Yes)
0 Reserved - -
0x0A
7-2 Reserved - -
1-0 USB 2.0 port count 0 2
0x0B
7-4 DDR4 ECC RAM size (GB) 0 (0 GB) 4 (8 GB) Resolution = 1 GB
3-0 QSPI flash memory size (MB) 0 (0 MB) 7 (64 MB) Resolution = 1 MB
0x0C
7-4 eMMC flash size (GB) 0 (0 GB) 5 (16 GB) Resolution = 1 GB
3-0 Reserved - -
Table 46: Module Configuration
26
The memory sizes are defined as Resolution×2
(Value-1)
(e.g. DRAM=0: not equipped, DRAM=1: 1 GB, DRAM=2:
2 GB, DRAM=3: 4 GB, etc).
Table 47 shows the available MPSoC types.
26
Property introduced starting with revision 3. For the “G1” module variants with 16 GTH transceivers on the module connector, a
value of 1 (Yes) is programmed to the EEPROM. For the standard module variants, a value of 0 (No) is programmed to the EEPROM.
The new EEPROM map definition is backwards compatible.
D-0000-428-001 59 / 66 Version 13, 15.08.2019
To Next Page
Loading...
Need help?
General
