EasyManuals Logo

Enclustra Mercury+ XU1 User Manual

Default Icon
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Warning!
It is possible to mount the Mercury+ XU1 SoC module the wrong way round on the base board - always
check that the mounting holes on the base board are aligned with the mounting holes of the Mercury+
XU1 SoC module.
The base board and module may be damaged if the module is mounted the wrong way round and
powered up.
1.1.6 Electrostatic Discharge
Electronic boards are sensitive to electrostatic discharge (ESD). Please ensure that the product is handled
with care and only in an ESD-protected environment.
1.1.7 Electromagnetic Compatibility
The Mercury+ XU1 SoC module is a Class A product and is not intended for use in domestic environments.
The product may cause electromagnetic interference, for which appropriate measures must be taken.
1.2 Features
Xilinx Zynq® UltraScale+™ MPSoC
XCZU6CG/XCZU6EG/XCZU9EG/XCZU15EG device
FFVC900 package
Dual-/Quad-core ARM® Cortex™-A53 MPCore™ up to 1.5 GHz
Dual-core ARM® Cortex™-R5 MPCore™ up to 600 MHz
Mali-400 MP2 GPU (not for CG variants)
Xilinx 16nm FinFET+ FPGA fabric
294 user I/Os
14 ARM peripheral I/Os (SPI, SDIO, CAN, I2C, UART)
200 FPGA I/Os (single-ended, differential or analog)
152 HP I/Os (up to 1.8 V)
148 I/Os up to 1.8 V
4 I/Os up to 3.3 V (routed via level shifters)
48 HD I/Os (up to 3.3 V)
80 MGT signals (clock and data)
60 GTH MGT signals
20 GTR MGT signals
Speedgrade 1 devices: 12 GTH MGTs @ 12.5 Gbit/sec and 6 reference input clock differential pairs
Other devices: 12 GTH MGTs @ 15 Gbit/sec and 6 reference input clock differential pairs
4 GTR MGTs @ 6 Gbit/sec and 2 reference input clock differential pairs
PCIe Gen2 ×4 (Xilinx built-in PCIe hard block using GTR lines)
Up to 4 GB DDR4 SDRAM with ECC
64 MB quad SPI flash
16 GB eMMC flash
2 × Gigabit Ethernet PHY (one PHY shared with one of the USB PHYs)
2 × USB 2.0 PHYs
PHY0 configured as host or device
PHY1 configured as host (shared with one of the Gigabit Ethernet PHYs)
USB 3.0 (Xilinx built-in USB 3.0 hard block using GTR lines)
Real-time clock
D-0000-428-001 7 / 66 Version 13, 15.08.2019

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Enclustra Mercury+ XU1 and is the answer not in the manual?

Enclustra Mercury+ XU1 Specifications

General IconGeneral
BrandEnclustra
ModelMercury+ XU1
CategoryControl Unit
LanguageEnglish

Related product manuals